1 Operators must be certified to work and strictly enforce the procedures for docking and signaling in the operating procedures.
2 After hearing the signal from the underground, send a red light first, then hit the signal. Make the car red light, and the car stops red light. 3 What signal is sent in the well, what signal is transmitted, and when the signal is unclear, the application phone asks for the signal and then transmits the signal. 4 When you hear the signal from the underground and cannot be transmitted in time, you should flash the red light or use the telephone to inform the underground signal to explain the reason. Once it returns to normal, the well must be notified first, and the signal must be transmitted after the downhole signal is heard again. 5 After the boost signal is transmitted, it is still necessary to concentrate on the hand, and the hand does not leave the intruder. Once the underground emergency stop signal is heard, the parking signal should be transmitted immediately. 6 When a person checks the wellbore or carries out other operations by using a bucket (hanging basket), he must first set a temporary signal transmission mode, notify or withdraw the underground staff, and act according to the operating procedures. 7 When the lifting container is in the well and the wellhead is in urgent need, it must first contact the underground and send a signal to the winch after receiving the lifting signal from the underground. 8 Signal workers must strictly abide by the work position, the spirit is concentrated, the mind is unclear and it is strictly forbidden to go to work. It is strictly forbidden to let others replace it, and it is even more difficult to use the foot to hand signal.
1. No need supplementary tool
2. Efficiency enhanced
3. Easy to operate, labor saved
4. Reliable and high accuracy
5. Remaining is fully utilized
6. Clip and single splice tape in one strip, accurate connecting with SMT splice
Application of SMT Double Splice Tape : Used for connecting the end of a depleted reel of components with
the beginning of a new reel without shutting off the SMT machine.
SMT Double Splice Tape,Double Splice Tape,SMT Machine Double Splice Tape, Special Double Splice Tape
ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com