- Model NO.: DS-AU
- Certification: ISO, CE
- Thread Number: Single-Thread
- Sewing Head Type: Chain Stitch
- Sewing Head Lifting Range: 125-450mm
- Max Machine Size: 2680X4150mm
- Corner Moter Power: 0.75KW
- Conveyer Belt Moter Power: 0.55KWx2
- Voltage: AC380V50Hz
- Transport Package: Plastic Film and Wooden Pallet
- Origin: Ningbo, China
- Condition: New
- Automatic Grade: Full-Automatic
- Sewing Head Number: Single-Head
- Mattress Thickness: 150-350mm
- Table Size: 2020X4150mm
- Lifting Moter Power: 0.37KW
- Sewing Head Moter Power: 0.37KW
- Total Power: 3KW
- Trademark: DOUBLESUN
- Specification: L*W*H: 2380x1400x1650mm
- HS Code: 8452219000
It's easy to operate,and a little training can achieve the highest production efficiency.depending on the mattress's size,this machine can easily finish 120-150 sheets in evry 8 hours.
The control panel is easy to operate according to the ergonomic design with multi-segment selection.
Once every work is done,it will give pe a signal to ensure that the needle and pin are in the highest position to facilitate the operator to use the equipment.
The flip of the mattress is automatically completed by the device to reduce the labor intensity and improve the working efficiency.according to the ergonomic design of the automatic corner system,it can be used independently,or can be connected to the mattress production line.
This machine is suitable for all production scale.
Improve the lifting system of machine head worbench.
The machine adopts SD-7l servo motor control to improve the control of the head.
The terminal control system is improved,and the control panel using touch control,intuitive and simplified operation.
It can program autonomously.
Main Performance Parameters:
Mattress Thickness | 150-350mm |
Sewing Head Lifting Range | 125-450mm |
Working Table Size | 2020x4150mm |
Max Machine Size | 2680x4150mm |
Lifting Moter Power | 0.37KW |
Corner Moter Power | 0.75KW |
Sewing Head Moter Power | 0.37KW |
Conveyer Belt Moter Power | 0.55KWx2 |
Total Power | 3KW |
Voltage | AC380V50HZ |
Air Pressure | 0.6-1.0Mpa |
DINP is non-toxic phthalate two Formic Acid ester Plasticizer, low volatile, little mobility can endow the products with good light resistance, heat resistance, aging resistance and electrical insulation, comprehensive performance is better than DOP,
Application:
Mainly used as general vinyl Resin plasticizer for PVC film, artificial leather, wire and cable and flooring materials, can be used to replace the DOP plasticizer, which has great market potential.
Diisononyl Phthalate,Toy Paes,Medical Grade Paes,Food Grade Paes
HENAN JINHE INDUSTRY CO.,LTD , https://www.speciatyelement.com