1. More than 30Years  --Zhejiang Junquan Automation Co., Ltd is built on 1985; Â
2. More than 20Years--Juanquan has  been working on e xploring products for more  than twenty years ;
3. Two producting base--Junquan have two producting base in Zhejiang Yueqing and Jiaxing;
4. 16000 square meters--The total area of Junquan is 16000 square maters;
5. All over the world--Junqan products have found ready markets in more than 50 countries  and regions, such as America, Europe, MID-East, Southeast Asia, Africa etc.Â
6. Advantages--Junquan products With high precision and working speed and comprehensive in  functions;
7. Honors  --Junquan products have been listed into the National Torch Program, National Innovation  Fund Program, has won several prizes for national, provincial and vivic level respectively Science and Technology;
8. "Live for quality and efficiency"  --Junquan Products' target; Â
9. One year--Junquan products have one year warranty;
10. Certificates--CE,ISO9001.
JQ-1 Full Automatic Terminal Crimping Machine (Both Ends)
1) Compact and high spped full automatic terminal crimping machine(JQ-1). High productivity and reiability using a positioning unit by servo motor and double drive wire feed unit. The outs tanding performance of the machine can be guaranteed by its;
2) Modularized edsign, proram logic control;
3) Structurized software design technology;
4) Advanced data-exchange scheme pre-feeder not required.
5) Combines simplicity and functionality with economy
6) Wide range of options and accessories available
7) Low maintenance costs due to use of standard components
8) One year warranty, full-life service
9) CE Approved.
Production capacity varies depends on the type of production.
Â
Model: | JQ-1 |
Measurement: | W1300× D1480× H1450 |
Weight: | 50KGSÂ |
Power supply: | AC220V |
Compressed air: | 0.5mpa(5kgf/cm) |
Press capacity:  | 19600n(2.0ton)× 2sets low noise type |
Wire size: Â Â | 0.05-2.0mm2(UL1007AWG#30-16) within O. D. 3.4mm |
capacity: | 0.85sec/PCS(in case of min wire length) |
Max cutting length: | 30--9999mm |
Cutting accuracy: | L≤ 100mm± (0.5+L ×  0.002) L> 100mm± (1.0+L× 0.002) |
Stripping length: | No. 1: 1.0-10.0mm  No. 2: 1.0-17.0mm |
Cutting depth: | 2mm 100steps(1step=0.02mm)Â |
Detector:  | Puessur down. crimp-mis. strip error Wire Presence Wire Load Wire Parameter Error Etc. |
Our Services:
Â
-Purchase guidance
If you are not sure which model is the best option within you budget, please send us the parameter or wire, it's our pleasure to make a recommendation and comparison modelsÂ
to you.
Â
---After Sale Service
Don't worry, we are here to help. JUNQUAN provides life time after sale support to our customers including operation guidance, parts replacement, maintenance support. JustÂ
feel free to contact us!
Â
--- Technical Support
In some cases, professional technical support will be needed , such as parameter meterÂ
set-up for difficult-to process wires. JUNQUAN engineers are here for your assistance.
FAQ
Â
---Is JUNQUAN a trading company ?
No, we are professional manufacturer of Wire Cutting Stripping Machine, TerminalÂ
Crimp Machine, Wire Cutting Machine, Fully Automatic Terminal Crimp MachineÂ
since 1985.
Â
---Can JUNQUAN do OEM service ?
Yes, we are happy to provide OEM service to expand our market.
Â
---About parts replacement and maintenance ?
JUNQUAN parts are free to change if there is worn-out within 1 year providing delivery fee paid. Technical support is available during  your   daily maintenance.
Â
---About distributor or wholesale annual sales rebate?
JUNQUAN provides a very competitive rebate policy for our distributors. For moreÂ
information ,   please contact us.
Â
---Quality certificates ,market entrance ticket ?
JUNQUAN machine got CE approval and will apply for more certificates in futureÂ
market demands.
Â
---What is the basic business principle of JUNQUAN ?
Passion and integrity. We trust work passion can provide best service and products toÂ
our customers and integrity the foundation of business. About Us:
1. More than 30Years  --Zhejiang Junquan Automation Co., Ltd is built on 1985; Â
2. More than 20Years--Juanquan has  been working on e xploring products for more  than twenty years ;
3. Two producting base--Junquan have two producting base in Zhejiang Yueqing and Jiaxing;
4. 16000 square meters--The total area of Junquan is 16000 square maters;
5. All over the world--Junqan products have found ready markets in more than 50 countries  and regions, such as America, Europe, MID-East, Southeast Asia, Africa etc.Â
6. Advantages--Junquan products With high precision and working speed and comprehensive in  functions;
7. Honors  --Junquan products have been listed into the National Torch Program, National Innovation  Fund Program, has won several prizes for national, provincial and vivic level respectively Science and Technology;
8. "Live for quality and efficiency"  --Junquan Products' target; Â
9. One year--Junquan products have one year warranty;
10. Certificates--CE,ISO9001.
JQ-1 Full Automatic Terminal Crimping Machine (Both Ends)
1) Compact and high spped full automatic terminal crimping machine(JQ-1). High productivity and reiability using a positioning unit by servo motor and double drive wire feed unit. The outs tanding performance of the machine can be guaranteed by its;
2) Modularized edsign, proram logic control;
3) Structurized software design technology;
4) Advanced data-exchange scheme pre-feeder not required.
5) Combines simplicity and functionality with economy
6) Wide range of options and accessories available
7) Low maintenance costs due to use of standard components
8) One year warranty, full-life service
9) CE Approved.
Production capacity varies depends on the type of production.
Â
Model: | JQ-1 |
Measurement: | W1300× D1480× H1450 |
Weight: | 50KGSÂ |
Power supply: | AC220V |
Compressed air: | 0.5mpa(5kgf/cm) |
Press capacity:  | 19600n(2.0ton)× 2sets low noise type |
Wire size: Â Â | 0.05-2.0mm2(UL1007AWG#30-16) within O. D. 3.4mm |
capacity: | 0.85sec/PCS(in case of min wire length) |
Max cutting length: | 30--9999mm |
Cutting accuracy: | L≤ 100mm± (0.5+L ×  0.002) L> 100mm± (1.0+L× 0.002) |
Stripping length: | No. 1: 1.0-10.0mm  No. 2: 1.0-17.0mm |
Cutting depth: | 2mm 100steps(1step=0.02mm)Â |
Detector:  | Puessur down. crimp-mis. strip error Wire Presence Wire Load Wire Parameter Error Etc. |
Our Services:
Â
-Purchase guidance
If you are not sure which model is the best option within you budget, please send us the parameter or wire, it's our pleasure to make a recommendation and comparison modelsÂ
to you.
Â
---After Sale Service
Don't worry, we are here to help. JUNQUAN provides life time after sale support to our customers including operation guidance, parts replacement, maintenance support. JustÂ
feel free to contact us!
Â
--- Technical Support
In some cases, professional technical support will be needed , such as parameter meterÂ
set-up for difficult-to process wires. JUNQUAN engineers are here for your assistance.
FAQ
Â
---Is JUNQUAN a trading company ?
No, we are professional manufacturer of Wire Cutting Stripping Machine, TerminalÂ
Crimp Machine, Wire Cutting Machine, Fully Automatic Terminal Crimp MachineÂ
since 1985.
Â
---Can JUNQUAN do OEM service ?
Yes, we are happy to provide OEM service to expand our market.
Â
---About parts replacement and maintenance ?
JUNQUAN parts are free to change if there is worn-out within 1 year providing delivery fee paid. Technical support is available during  your   daily maintenance.
Â
---About distributor or wholesale annual sales rebate?
JUNQUAN provides a very competitive rebate policy for our distributors. For moreÂ
information ,   please contact us.
Â
---Quality certificates ,market entrance ticket ?
JUNQUAN machine got CE approval and will apply for more certificates in futureÂ
market demands.
Â
---What is the basic business principle of JUNQUAN ?
Passion and integrity. We trust work passion can provide best service and products toÂ
our customers and integrity the foundation of business.
Many Vehicle Sensors, sensor fault judgment, should not only consider the the sensor itself, but should consider the failure of the entire circuit. Therefore, in the search failure, in addition to check sensor, but also check the wiring harness, connectors and related circuit between the sensor and the electronic control unit.
Basic
Function:
The sensor refers to the physical
experience requirements, and according to certain rules to convert the input
signal of the device or devices available. Simply, sensor is the electricity
conversion device. The sensor is usually composed of non electric sensitive
element, conversion element and measurement circuit composed of three parts.
1), the sensitive element refers to the direct feeling (or response) by
measuring part will be measured by the sensing element and the measured is
converted into electricity or other quantity relationship. 2), the non
electricity converting element converts electrical parameters. 3), the
measuring circuit is the role of the input electrical parameters after
conversion element processing to convert the voltage, current or power
frequency can be measured, for display, record, control and processing part.
Category:
The air flow sensor is the inhaled air is
converted into electrical signals sent to the electronic control unit (ECU), as
one of the basic signal injection. According to measuring principle is
different, can be divided into rotary vane type air flow sensor, Carmen vortex
type air flow sensor, hot wire air flow sensor and the hot film air flow sensor
four the first two types. As the volume flow type, which is the quality of flow
type. Using hot wire air flow sensor and the hot film air flow sensor two. The
intake pressure sensor can measure the absolute pressure in the intake manifold
of the engine according to the load condition, and converted into electrical
signals and speed signals together into the computer, as determines the
injector fuel injection quantity basis. Is the widely used semiconductor
varistor type air pressure sensor. The solar term door position sensor mounted
on the day The valve, used to detect solar term door opening. It through the
linkage lever mechanism and the solar term door, which reflect the different
engine working conditions. The sensor can be put in different conditions after
the input detection engine electronic control unit (ECU), so as to control the
fuel injection quantity. It has three different types: switch contact type
solar term door position sensor linear, variable resistance type solar term
door position sensor, integrated solar term door position sensor, crankshaft
position sensor crankshaft position sensor crankshaft position sensor or crank
angle sensor, the sensor is the most important in computer controlled ignition
system, its function is to detect the TDC signals, crank angle signals and
engine speed signal, and input it the computer so that the computer can be in
the firing order of the cylinder from the best ignition time instruction.
Crankshaft position sensor has three types: electromagnetic pulse Crankshaft
position sensor, crankshaft position sensor Holzer effect, photoelectric effect
type crankshaft position sensor. The crankshaft position sensor of different
types, the control method and the control precision is different. The
crankshaft position sensor is installed on the crankshaft pulley or sprocket
side, some mounted on the front of the cam shaft, there are installed in the
distributor. The knock sensor installation in the engine block, the monitoring
of engine knock. The resonance and non resonance type two categories.
Static performance parameters:
The static performance parameters of the
sensor sensitivity refers to the ratio of the sensor output y and input X of
the steady state, and the increment of input or output x y increment ratio,
denoted by K k=dy/dx, the minimum resolution of change of the quantity being
measured in the measurement of force sensor can be detected within the
prescribed scope of the called the resolution. 3 the measuring range and the
range of the allowable error limit, the lower limit of the measured value to
the upper bound of the range between the called measurement range. The
linearity (nonlinear error) under specified conditions, the calibration curve
fitting and the percentage of the maximum deviation between the line sensor and
full-scale output value is called linearity or the nonlinear error. Hysteresis
refers to under the same operating conditions, the extent of the inconsistency
and anti stroke characteristic positive stroke characteristics of sensor. The
repeatability reproducibility refers to the same working conditions, The
inconsistency of the input in the same direction in the whole measuring range
change continuously in multiple characteristic curve. The income of zero drift
and temperature drift of sensor without input or to another value, at regular
intervals, the input value of percentage deviation from the maximum deviation
of the original value and the full range of zero drift. When the temperature
rise of 1 degrees Celsius, the maximum deviation of the sensor output value and
the full range of percentage, called the temperature drift.
Vehicle Sensors
Vehicle Sensors,Speed Sensor,Car Coolant Sensor,Oil Level Sensor
VESTA Motoring Ltd , http://www.vesta-industry.com