Magnetic-driven circulating pump is running even the shaft and impeller, respectively, equipped with magnetic coupling and the mutual attraction, with no conventional mechanical seal, which is completely sealed.
Motor torque by rotating active magnetic and gravitational magnetic follower driven operation. Nowadays, magnetic drive pump used great disadvantage is the lack of fluid is absolutely no circumstances will be running machine or damage, it caused users unnecessary trouble and annoyance. But "Haihe Pumps" magnetic drive pumps do not have to worry about above case. It selects a special formula specifically designed for ceramic bearings, with very strong resistance to abrasion and corrosion resistance to the advanced performance and quality to ensure absolute safety.
Magnetic drive circulation pump adopt seal-free design, completely avoid the traditional mechanical pump seal leak the existence of liquid after the pollution caused by corrosion of the defects, industrial equipment is the most ideal liquid pump.
Specification
Flow Range: 8 ~ 330L/min
Head Range: 1 ~ 18m
Main materials: GFRPP
Power range: 3 ~ 2200W
Liquid temperature range: 0 ~ 80 degree
Application
This pump can transport acid, alkali, salt, oil, beverages and other media, are widely used in chemical, petrochemical, fine chemicals, dyes chemical industry, environmental protection, water treatment, medicine, food and other departments
Model                   |       Tube Connection | Thread Connection | MaxFlow (L/min) |
MaxHead  (m) |
Standard | S. G | Motor | ||||
Inlet(mm) | Outlet(mm) | Inlet(inch) | Outlet(mm) | 50Hz/60Hz | 50Hz/60Hz | Flow(L/min)50Hz/60Hz  | Head(m) 50Hz/60Hz |
 | Power(w) 50Hz/60Hz |
Phase | |
MP-6R | 14 | 14 | - | - | 8/9 | 1/1.4 | 2.8/5 | 0.8 | < 1.2 | 3 | 1 |
MP-6RZ | 14 | 14 | - | - | 5.5/6 | 2.1/2.7 | 3.2/4.5 | 0.8 | < 1.1 | 3 | 1 |
MP-10R | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
MP-10RN | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
MP-15R | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
MP-15RN | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
MP-15RM | - | - | 3/4 | 13 | 16/19 | 2.4/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
MP-20R | 18 | 18 | - | - | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
MP-20RM | - | - | 3/4 | 16 | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
MP-20RX | 26 | 26 | - | - | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
MP-20RXM | - | - | 1 | 20 | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
MP-2RZ | 18 | 18 | - | - | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
MP-20RZM | - | - | 3/4 | 13 | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
MP-30R | 20 | 20 | - | - | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
MP-30RM | - | - | 3/4 | 16 | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
MP-30RX | 26 | 26 | - | - | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
MP-30RXM | - | - | 1 | 20 | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
MP-30RZ | 18 | 18 | - | - | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
MP-30RZM | - | - | 3/4 | 13 | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
MP-40R | 20 | 20 | - | - | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
MP-40RM | - | - | 3/4 | 16 | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
MP-40RX | 26 | 26 | - | - | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
MP-40RXM | - | - | 1 | 20 | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
MP-55R | 26 | 26 | - | - | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
MP-55RM | - | - | 1 | 20 | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
MP-55RZ | 26 | 26 | - | - | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
MP-55RZM | - | - | 1 | 20 | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
MP-70R | 26 | 26 | - | - | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
MP-70RM | - | - | 1 | 20 | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
MP-100R | 26 | 26 | - | - | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
MP-100RM | - | - | 1 | 20 | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
MP-100RX | - | - | 1 1/4 | 32 | 170 | 9.0 | 100 | 5.0 | < 1.3 | 250 | 1or3 |
MP-120R | - | - | 1 1/2 | 36 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
MP-120RT | - | - | 2 1/4 | 48 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
MPH-400CV5-D | - | - | 1 1/2 | 36 | 260 | 12.5 | 150 | 8.5 | < 1.3 | 370 | 3 |
MPH-401CV5-D | - | - | 1 1/2 | 36 | 330 | 18 | 200 | 12 | < 1.3 | 750 | 3 |
MPH-422CV5-D | - | - | 2 | 1 1/2 | 300 | 21 | 200 | 18.5 | < 1.3 | 1500 | 1or3 |
MPH-423CV5-D | - | - | 2 | 1 1/2 | 360 | 22 | 300 | 20.5 | < 1.3 | 2200 |
Magnetic-driven circulating pump is running even the shaft and impeller, respectively, equipped with magnetic coupling and the mutual attraction, with no conventional mechanical seal, which is completely sealed.
Motor torque by rotating active magnetic and gravitational magnetic follower driven operation. Nowadays, magnetic drive pump used great disadvantage is the lack of fluid is absolutely no circumstances will be running machine or damage, it caused users unnecessary trouble and annoyance. But "Haihe Pumps" magnetic drive pumps do not have to worry about above case. It selects a special formula specifically designed for ceramic bearings, with very strong resistance to abrasion and corrosion resistance to the advanced performance and quality to ensure absolute safety.
Magnetic drive circulation pump adopt seal-free design, completely avoid the traditional mechanical pump seal leak the existence of liquid after the pollution caused by corrosion of the defects, industrial equipment is the most ideal liquid pump.
Specification
Flow Range: 8 ~ 330L/min
Head Range: 1 ~ 18m
Main materials: GFRPP
Power range: 3 ~ 2200W
Liquid temperature range: 0 ~ 80 degree
Application
This pump can transport acid, alkali, salt, oil, beverages and other media, are widely used in chemical, petrochemical, fine chemicals, dyes chemical industry, environmental protection, water treatment, medicine, food and other departments
Model                   |       Tube Connection | Thread Connection | MaxFlow (L/min) |
MaxHead  (m) |
Standard | S. G | Motor | ||||
Inlet(mm) | Outlet(mm) | Inlet(inch) | Outlet(mm) | 50Hz/60Hz | 50Hz/60Hz | Flow(L/min)50Hz/60Hz  | Head(m) 50Hz/60Hz |
 | Power(w) 50Hz/60Hz |
Phase | |
MP-6R | 14 | 14 | - | - | 8/9 | 1/1.4 | 2.8/5 | 0.8 | < 1.2 | 3 | 1 |
MP-6RZ | 14 | 14 | - | - | 5.5/6 | 2.1/2.7 | 3.2/4.5 | 0.8 | < 1.1 | 3 | 1 |
MP-10R | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
MP-10RN | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
MP-15R | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
MP-15RN | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
MP-15RM | - | - | 3/4 | 13 | 16/19 | 2.4/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
MP-20R | 18 | 18 | - | - | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
MP-20RM | - | - | 3/4 | 16 | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
MP-20RX | 26 | 26 | - | - | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
MP-20RXM | - | - | 1 | 20 | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
MP-2RZ | 18 | 18 | - | - | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
MP-20RZM | - | - | 3/4 | 13 | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
MP-30R | 20 | 20 | - | - | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
MP-30RM | - | - | 3/4 | 16 | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
MP-30RX | 26 | 26 | - | - | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
MP-30RXM | - | - | 1 | 20 | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
MP-30RZ | 18 | 18 | - | - | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
MP-30RZM | - | - | 3/4 | 13 | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
MP-40R | 20 | 20 | - | - | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
MP-40RM | - | - | 3/4 | 16 | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
MP-40RX | 26 | 26 | - | - | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
MP-40RXM | - | - | 1 | 20 | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
MP-55R | 26 | 26 | - | - | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
MP-55RM | - | - | 1 | 20 | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
MP-55RZ | 26 | 26 | - | - | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
MP-55RZM | - | - | 1 | 20 | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
MP-70R | 26 | 26 | - | - | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
MP-70RM | - | - | 1 | 20 | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
MP-100R | 26 | 26 | - | - | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
MP-100RM | - | - | 1 | 20 | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
MP-100RX | - | - | 1 1/4 | 32 | 170 | 9.0 | 100 | 5.0 | < 1.3 | 250 | 1or3 |
MP-120R | - | - | 1 1/2 | 36 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
MP-120RT | - | - | 2 1/4 | 48 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
MPH-400CV5-D | - | - | 1 1/2 | 36 | 260 | 12.5 | 150 | 8.5 | < 1.3 | 370 | 3 |
MPH-401CV5-D | - | - | 1 1/2 | 36 | 330 | 18 | 200 | 12 | < 1.3 | 750 | 3 |
MPH-422CV5-D | - | - | 2 | 1 1/2 | 300 | 21 | 200 | 18.5 | < 1.3 | 1500 | 1or3 |
MPH-423CV5-D | - | - | 2 | 1 1/2 | 360 | 22 | 300 | 20.5 | < 1.3 | 2200 |
Annealed steel bar is produced by annealing which is one kind of heat treatment to get proper hardness for machining. Our advantages and more services of annealed steel bar includes:
1) Wide range of diameters from 10mm to 300mm
2) Customized Length from 100mm to 12000mm
3) Good surface roughness: 0.4um to 1.5um
4) Good straightness: 0.5mm/m to 2mm/m
5) Good roundness: 80% of diameter tolerance
6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11
7) Matched further processing: Grinding, polishing, straightening
8) Anti-rusty package
9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing
10) Fast delivery time
Annealed Steel Round Bar, Annealed Steel Bar,Hot Rolled Annealed Steel,Cold Drawn Annealed Steel,Annealed Steel Rod
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com