product description:
C02 laser marking machine uses imported RF laser with high-speed galvanometer scanning system, by adjusting the laser output power to control the marking of the depth, the product surface marking, engraving, cutting, for small format static processing, long Time to work continuously. It can meet the requirements of high-speed marking of plastic products, wood products, paper, leather, fabric, plexiglass, epoxy resin, acrylic and other industries. The machine is very fast, the effect is fine, no consumables, no pollution and no pollution. , Engraving requirements.
Technical Parameters:
Maximum laser power Biggest Laser power: 10W / 20W / 30W / 50W / 60W / 100W
Laser wavelength: 10.64μm
Sculpture range: 0-100mm, 0-200mm, 0-300mm or order Or ordering
Engraving line speed Engraving line speed: ≤ 7000mm / s
Laser life:> 20000 hours hours (RF tube)
                              <1000 hours hours (glass tube)
Power supply: 220V / single phase (single-phase) / 50Hz
Optional accessories: All kinds of accessories
Production line paging machine Smoke suppressors synchronizer flat field focus lens all kinds of production line paging machine, etc
Â
Applicable materials and industry applications
Suitable for bamboo, coconut shell, paper, plexiglass, PCB board, acrylic, rubber, marble, granite, jade, crystal, leather, fabric and so on the vast majority of non-metallic materials. Used in craft gifts, advertising decoration, toys, electronic appliances, clothing, medicine, food, paper products and other industries.
Dimension of fiber laser marking machine:
Â
Spare parts:
Samples:
Certificates:
Â
product description:
C02 laser marking machine uses imported RF laser with high-speed galvanometer scanning system, by adjusting the laser output power to control the marking of the depth, the product surface marking, engraving, cutting, for small format static processing, long Time to work continuously. It can meet the requirements of high-speed marking of plastic products, wood products, paper, leather, fabric, plexiglass, epoxy resin, acrylic and other industries. The machine is very fast, the effect is fine, no consumables, no pollution and no pollution. , Engraving requirements.
Technical Parameters:
Maximum laser power Biggest Laser power: 10W / 20W / 30W / 50W / 60W / 100W
Laser wavelength: 10.64μm
Sculpture range: 0-100mm, 0-200mm, 0-300mm or order Or ordering
Engraving line speed Engraving line speed: ≤ 7000mm / s
Laser life:> 20000 hours hours (RF tube)
                              <1000 hours hours (glass tube)
Power supply: 220V / single phase (single-phase) / 50Hz
Optional accessories: All kinds of accessories
Production line paging machine Smoke suppressors synchronizer flat field focus lens all kinds of production line paging machine, etc
Â
Applicable materials and industry applications
Suitable for bamboo, coconut shell, paper, plexiglass, PCB board, acrylic, rubber, marble, granite, jade, crystal, leather, fabric and so on the vast majority of non-metallic materials. Used in craft gifts, advertising decoration, toys, electronic appliances, clothing, medicine, food, paper products and other industries.
Dimension of fiber laser marking machine:
Â
Spare parts:
Samples:
Certificates:
Â
Tongue And Groove Face Flanges
The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it's face.
Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.
Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.
General flange faces such as the RTJ, TandG and the FandM shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.
Tongue And Groove Face Flanges,Tongue & Groove Flange,Groove Flanges,Tongue And Groove Joint Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com