Barite is an important mineral raw material. As a kind of mineral resource, unprocessed and refined barite often cannot get a good market. In order to obtain the ideal sales price and sales, it must be barite. The ore mine is industrially produced and purified.
The barite ore is mostly blocky. The first step of industrial production purification is crushing. The bulk barite ore is broken into small pieces, and then sieved and classified into 30-50, 8-30, 0-8 and +. 50mm four grades, larger than 50mm lump ore return crusher broken, 30 ~ 50mm grain level into the hand selection process, 8 ~ 30mm grain level into the AM30 jig for coarse jigging sorting, 0 ~ 8mm grain size into the trapezoid The jig is in progress and the fine jigging is sorted. After sorting, the concentrate tailings are dehydrated by dewatering screen, the water re-ranges the water circulation process, the tailings enter the tailings field, and the concentrate is graded and stacked.
Introduction to mineral processing equipment:
The barite is brittle and brittle, and a good crushing effect can be obtained by simple crushing. Therefore, the crushing process uses a coarse jaw crusher to crush the ore. The crushing process is simple and reliable, saves the finished product, and has high crushing efficiency. . The screening process uses a circular vibrating screen to screen and classify the crushed ore. The circular vibrating screen has a simple structure, simple operation, low maintenance cost, and is suitable for screening and grading operations of barite ore.
The hand selection process can be used to debug the belt hand picker at a simple speed, and the coarse grain barite lump ore is manually sorted.
The jigging process uses AM30 jig and 2LTC～6109/8T jig to efficiently sort 0～30mm grain-level barite ore, and concentrates the concentrate to obtain a variety of different grain-level barite concentrates.
The dewatering process uses a linear dewatering screen to dewater the concentrate and tailings separately to minimize moisture in the concentrate and tailings, ensuring minimal water loss.
NINGBO RUICAN MACHINERY COMPANY can supply the Lock Parts according to the clients' technical drawings or samples,and offer different surface treatments,such as plating zinc,powder coating,electrophoresis,mirror polishing and so on.
Each type of lock is built differently, but let`s take a look at the anatomy of a typical door lock usually used in homes or light commercial buildings. The main parts of a door lock are the cylinder, bolt, box and strike plate.
It`s useful for any DIY-er to know how things around the home operate. Understanding the different parts that work together to make a door handle and lock work, can help you fix minor problems on your own.
NINGBO RUICAN MACHINERY COMPANY is confident to offer the good lock parts to you.
Lock Parts
Lock Parts,Lock Rod Parts,Door Lock Parts,Security Lock Parts
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com