Ta45 Turbo Charger 466818 - 5003 422938 422856 Turbocharger for 310HP Volv O Truck

TA45 turbo charger 466818 - 5003 422938 422856 turbocharger for 310HP Volvo
truck

    Specification
    1)Turbo model:TA45
    2)Materail:Iron+Aluminum
    3)Cooled type:Oil cooled
    4)Fuel type:Deisel
    5)Power:211HP
    6)Capacity:2.5L
    7)OEM NO:466818-8
    8)Certificate:ISO9001/TS16949
    9)Brand:GRWA
 

TA45 turbo charger 466818 - 5003 422938 422856 turbocharger for 310HP Volvo
truck


    The turbocharger on a car applies a very similar principle to a piston engine. It uses the exhaust gas to drive a turbine. This spins an air  compressort hat  pushes  extra air  ( and oxygen)  into the cylinders , allowing  them to burn  more  fuel  each second . And The objective  of  a  turbocharger  can  improve  an  engine's  volumetric efficiency by increasing density  of  the  intake gas  (usually air)  allowing more  power  per  engine  cycle. The turbocharger's compressor draws in ambient air and compresses it before it enters into the intake manifold at increased pressure.



    
    

TA45 turbo charger 466818 - 5003 422938 422856 turbocharger for 310HP Volvo
truck

    Specification
    1)Turbo model:TA45
    2)Materail:Iron+Aluminum
    3)Cooled type:Oil cooled
    4)Fuel type:Deisel
    5)Power:211HP
    6)Capacity:2.5L
    7)OEM NO:466818-8
    8)Certificate:ISO9001/TS16949
    9)Brand:GRWA
 

TA45 turbo charger 466818 - 5003 422938 422856 turbocharger for 310HP Volvo
truck


    The turbocharger on a car applies a very similar principle to a piston engine. It uses the exhaust gas to drive a turbine. This spins an air  compressort hat  pushes  extra air  ( and oxygen)  into the cylinders , allowing  them to burn  more  fuel  each second . And The objective  of  a  turbocharger  can  improve  an  engine's  volumetric efficiency by increasing density  of  the  intake gas  (usually air)  allowing more  power  per  engine  cycle. The turbocharger's compressor draws in ambient air and compresses it before it enters into the intake manifold at increased pressure.



    
    

Core Drilling Machine

Main features:
1. The drilling machine has high input power, high output torque and strong drilling capacity.
2. The output speed range of the drilling machine is wide, which is suitable for both engineering geological investigation and diamond core drilling.
3. The drilling machine is equipped with an open box rotator for easy operation of the orifice.
4. The utility model has an oil pressure feeding mechanism and a ball clamp type clamping mechanism at the upper end of the vertical shaft, which can improve the drilling efficiency and reduce the labor intensity of the workers.
5. The drilling rig is equipped with active drill pipe, which can realize non-stop reversing, with high efficiency, safety and reliability.
6. The drilling rig adopts the double plate normally closed friction clutch, which is flexible in opening and closing and convenient in operation and adjustment.
7. The gear box of the drilling rig adopts the structure of automobile gear box, with single handlebar speed change and interlock mechanism, which is convenient for operation.
8. The drilling machine is separated from the water pump, and the pump and the drilling machine are separately equipped with power, which can improve the output torque of the drilling machine, especially when entering the deep hole for drilling, there will be no contradiction in the use of the water pump due to the decrease of power, so as to avoid accidents in the hole.
9. The drilling rig is compact in structure, small in volume, light in weight, and the largest part is less than 100kg, which is convenient for disassembly and handling, and suitable for working in hills or mountains.

Core Drilling Machine,Core Bit,Core Hole Drill,Core Bit Set

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com