Ship to Ship Dock Fenders Bunkering Yokohama Pneumatic Ship Fenders

Model NO.: 0.5m*1.0m-4.5*12m
Length: From1m to 12m
Part: Pressure Guage and Spanner
Trademark: Aohai
Transport Package: According to Customer Request
Specification: see attached
Origin: China
HS Code: 40169400
1. Primary business:
 
Aohai Marine Fittings Co., Ltd mainly produce: 
 
  • Yokohama type fender net type
  • Sling pneumatic rubber fender
  • Ribbed pneumatic rubber fender
Certificate: ABS, LR, BV, NK, DNV, RINA, RS, IRS,CCS etc.

Floating pneumatic rubber fender, Yokohama fender, ship airbags,Super cell fenders (SC type), Cone fenders, Super Arch fenders (type SA), Cylindrecal fenders (Type Y), Semi-circular fenders (Type D), Type GD fenders, Type I fenders, Type U fenders,Turn cell fenders, Type π rubber fenders, Rubber ladder, Rubber fenders for tug boats, PVC yacht fenders etc.
 
We have 15 years experience in rubber fender production and our customers include:

 Mearsk , MSC, COSCO, CMACGM, OOCL, APL, NYK , NEW YORK port, KOBE port, YOKOHAMA port, Singapore port, ANTWERP port, LONDON port, HAMBURG port, DUBAI port, QINGDAO port, SHANGHAI port etc.
 

2.Product description:

Penumatic rubber fender with chain protection

(1) High energy absorption

The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. ShunDehai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.


(2) Ultra low back pressure
The inside air of Shundehai pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of Shundehai sea inflatable fender, its adaptability is much higher than other fender.
 

(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
 

Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.

(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
 

(6) Our inflatable fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock.

Ship to Ship Dock Fenders Bunkering Yokohama Pneumatic Ship Fenders




3. Specifications and Measures:


Fender performance specification  
 
Size  Initial internal pressure Guaranteed energy absorption
                 GEA(kJ) 		Reaction force at GEA deflection
                       R((kN))
D×L(m) (Kpa) Minimum value at deflection
60±5% 		Tolerance ±10%
0.5×1.0 50 6 64
0.6×1.0 50 8 74
0.7×1.5 50 17 137
1.0×1.5 50 32 182
1.0×2.0 50 45 257
1.2×2.0 50 63 297
1.35×2.5 50 102 427
1.5×3.0 50 153 597
1.7×3.0 50 191 639
2.0×3.5 50 308 875
2.5×4.0 50 663 1381
2.5×5.5 50 943 2019
3.0×5.0 50 1210 2104
3.0×6.0 50 1485 2583
3.3×4.5 50 1175 1884
3.3×6.0 50 1675 2783
3.3×6.5 50 1814 3015
3.3×10.6 50 3067 5257
4.5×9.0 50 4752 5747
4.5×12.0 50 6473 7984


Ship to Ship Dock Fenders Bunkering Yokohama Pneumatic Ship Fenders


4.Contact information:

Anita Lee

TEL: +0086-18953229660 (24 hrs)

Fax:+86 532 5565 3888

Website:www.aohaimarine.com

5.Photos for reference:


Ship to Ship Dock Fenders Bunkering Yokohama Pneumatic Ship Fenders



 

Label Inspection System

We are very persistent in innovation, firmly believe in using the power and ability of innovation to continuously develop and manufacture newer and more reliable products, and use innovative technology to integrate resources to meet the diverse needs of customers.

We adhere to the principles of fairness, honesty and trustworthiness to our customers and partners, and create an equal, open and pragmatic working atmosphere for our employees. It is our goal to attach importance to teamwork and build an efficient and unified team. Help customers solve practical problems by continuously innovating technical strength and all-round pre-sale after-sales service.

Label Inspection System,Label Inspection System Services,Label Inspection System Machine

Suzhou YUZHEN Automation Technology Co.,Ltd. , https://www.yuzenvision.com