The electric hanging basket can cause unexpected accidents while working

The electric hanging basket can cause unexpected accidents while working

The sum of the weight of the electric basket working platform and the lifting machine is about 300kg plus the total weight of the staff and the material is about 600kg. The force point falls on the two 16mm pin diameters. This diameter 18mm pin is above the load chain. On this load-bearing chain, the pin whose diameter is larger than the working platform is reasonable, but the pylon fixed to the hanging beam is supported by an ordinary M14 bolt. Obviously, the strength of the bearing point is problematic. The cross beam is located on the front bracket of the suspension mechanism. The front bracket saddle and the front cross beam are connected by two M14 bolts. The front bracket lifts the local support or is supported by two M14 bolts. Each of the front cross beam and the front bracket has two M14 bolts. If the bolt can be evenly subjected to force, then look from the load-bearing chain forward. There is no problem in the whole force chain of the electric basket. However, due to the limitation of machining accuracy, the actual force of the two bolts is only one bolt of M14. Withstand the load.
Hanging connection is not reasonable
The majority of domestic electric suspension baskets are made of rectangular thin-walled tubes with 82x82x4 and 70x70x4 thin-walled tubes. There is no problem with this strength of use. At present, only a few connections should be considered. Nowadays, the hanging baskets used in the construction site are connected with several sets of joints and are connected with M14 bolts. The effect of bolts is mainly in the machinery. But in each part of the suspension where the bolts are tightened to what level Talented "solid" torque square tube deformation, the next disassembly inconvenient; the small torque of the bolt may retreat, the consequences can be disastrous. Therefore, the suspension of the local several sets of local bolted connection need to be scrutinized.
More electric basket information please visit

Shandong Ningjin Yaofa Door Industry Co., Ltd. is a large-scale modernization company that specializes in the development, production, sales, and installation of retractable doors, electric retractable doors, automatic barriers, guard posts, IC card parking lot management systems and other related products. High-tech enterprises.

     Retractable door    

Shandong Dejian Haojian Fitness Equipment Co., Ltd. is a manufacturer and manufacturer of sports equipment and fitness equipment. Our company mainly produces professional manufacturers of indoor exercise machines such as spinning bikes and aerobic treadmills. It is a franchise company that promotes various famous sports products.

Fitness Equipment    

Spinning bike    

What brand of spinning is good   

  Ningjin Ruida Basket Co., Ltd. mainly produces: hanging baskets, electric baskets, pedal baskets, and high-altitude baskets. Ruida Basket Factory is a professional manufacturer of high-altitude baskets, electric baskets and ankle baskets.

Reda basket  

         

         

Ningjin Pengzhan Elevator Parts Factory of Shandong Province, referred to as Pengzhan Elevator, mainly produces elevator accessories, escalator accessories and escalator accessories.

Elevator accessories  

         

           

Constant Force Actuator

Grinding sanding polishing abrasive constant force actuator is widely used in nowadays industrial production. Our Force Control System is different from traditional Grinder. Our active contact flange is not single grinder, it has many advantages: flexible control, quick response, instant adjusting. Current market grinder can not realize flexible control. It will reduce the yield rate a lot.

Grinding force control system,sanding constant force actuator,polishing active contact flange,abrasive constant force actuator

DARU Technology (Suzhou) Co., Ltd. , https://www.yiwufizz.com